.500″ Diameter Shoulder Pins
Our .500" diameter shoulder leader pins are made from 4150 case hardened steel for press fit installation in your high pressure die cast or injection mold tooling. Quality is unquestionable as our pins are widely used by injection molding and high pressure die casters throughout North America, including Tier 1 tooling suppliers.
| Press Fit Length (D) | G | Overall Length (L) | P/N |
|---|---|---|---|
| 7/8 | 7/8 | 1-3/4 | 500-707 |
| 1-3/8 | 2-1/4 | 500-713 | |
| 1-7/8 | 2-3/4 | 500-717 | |
| 2-3/8 | 3-1/4 | 500-723 | |
| 1-3/8 | 7/8 | 2-1/4 | 501-307 |
| 1-3/8 | 2-3/4 | 501-313 | |
| 1-7/8 | 3-1/4 | 501-317 | |
| 1-7/8 | 7/8 | 2-3/4 | 501-707 |
| 1-3/8 | 3-1/4 | 501-713 | |
| 1-7/8 | 3-3/4 | 501-717 | |
| 2-3/8 | 7/8 | 3-1/4 | 502-307 |
| 2-7/8 | 1-3/8 | 4-1/4 | 502-713 |